EX2600

Main Features:

1. Assembled structure, permanent use, high efficiency and energy saving.

2. The racks are all made of high-temperature plastic spraying, and the cleaned parts are all made of stainless steel.

3. The conveying roller of the whole machine adopts vulcanized rubber (no contact with acid liquid) rubber roller with a diameter of 75mm.

4. The upper section is equipped with a stainless steel drain pan, a spray system, and all spray pipes are quickly connected for easy disassembly and cleaning.

5. The cleaning area and the air-drying area are lifted and lowered as a whole, the maximum lift is 350mm, which is convenient for cleaning and maintenance.

6. The cleaning section is equipped with three pairs of brushes (∮160mm) 304 shaft heads, of which special soft bristles can clean LOW-E glass, coated glass, and the upper cleaning part of the hard bristles brushes are all equipped with cylinders that can be lifted independently, washing LOW- For E glass, the hard brush is lifted, and the brush speed is adjusted by frequency conversion.

7. Two pairs of special aluminum air knives, strong wind, two designs of a pair of straight air knives and a pair of oblique air knives, the effect of removing water droplets from the flat glass tail of the thick plate is better.

8. The entire air box is installed on the upper part of the equipment, and the air inlet chamber of the high-pressure fan is equipped with an air filter, which is convenient for inspection and cleaning.

9. The main drive is umbrella gear drive, and the conveying is variable frequency speed regulation. The brushes are respectively driven by two sets of upper and lower motors with independent toothed belts. The speed is stable and the service life is long.

10. The water tank of the washing machine is an external water tank, equipped with a movable universal wheel, drainage at the bottom, which is convenient for cleaning, changing water, and checking the water tank, so that the washing effect of the washing machine is better.